Water Softening

30 / Jan

A water softener typically consists of two tanks, a larger one into which rock or pellet salt is added and a smaller tank containing the ion exchange resin through which the hard water passes. A control valve fixed atop the resin tank of the industrial water softener causes the system to recharge or regenerate based on passage of a pre-set time or it meters the water treatment and initiates regeneration based on a pre-set number of gallons treated.
When regeneration is initiated, the first step is to backwash the resin bed with raw water to fluff the resin and remove entrained dirt and sediment. Then brine is slowly deducted from the salt tank at a set flowrate for a specific time (set as a function of the resin volume and the influent water hardness), followed by a slow draw of raw water to slowly displace the brine solution. This is followed by a faster flow of raw water to thoroughly flush any remaining salt from the resin bed. During this entire process, the control valve either prevents raw water from flowing to service or allows raw water to by-pass the softener during regeneration. Often two parallel industrial water softeners are operated together, in order to avoid any interruption to soft water.
If you want to get more info ,please contact us here:
Belcy Jia
Email:belcy@yuanda-boiler.com
Mobile/skype/whatsapp:+86 15038393653
District, Xihua County, Zhoukou, Henan, China (Mainland)
Henan Yuanda Boiler Corporation Ltd -Professional boiler manufacturer Since 1956
Website: yd-boiler.com/products/more-products/water-softening-device.html